View cut/fill profile

Use “View Cut/Fill Profile ” icon for cut and fill plot

The cut and fill profile based on the design vertical curve can also be displayed by clicking on the fill/cut icon,    from the toolbar as shown in Figure 12(a). The zero line in the cut and fill profile represents the proposed vertical curve design. Lines above zero means cut (elevation higher than design vertical curve) and lines below zero requires fill (elevation lower than designed curve). Maximum cut and fill specified in the design settings screen (Figure 2) are also plotted for references. Click on the “Data” button at the upper right corner of the graph to view the fill and cut data and save it to a text file.

 

Figure 12(a) Cut and fill profile

<<< Back to Tutorial  >>>